CUSTOMIZED CABLE SOLUTIONS

The cables of this family cover the main application requirements for power, signalling and control in automation systems. For each type of applications we have chosen the most modern materials, adequate to ensure the maximum reliability of the electrical connection. From the fixed installation up to continu-ous movements with high-performance behaviour, all our cables are characterized by excellent resistance to oils and industrial fluids, low capacity and - in the shielded version - with an excellent noise immunity.
Download Datasheet

The UL LISTED family of MotionCables includes unshielded and shielded cables developed for the uses defined by ANSI / NFPA 79 and ANSI / NFPA 70, NEC (National Electric Code). They are suitable for a wide range of applications, including machine tool control, conveyor lines, and assembly lines where moderate mechanical stresses occur. They are also particularly resistant to industrial oils and can operate in high humidity
Download Datasheet

DRIVEConn® MT Power & SERVO Cables main focus is on high flexibility, continu-ous bending and long lasting cycles life. Speed and withstand of harsh environ-ments are between their advantages, plus the fact of being in com-plete according to UL, CSA and DESINA and are highly EMC compatible free of electrical interfer-ences. Available are the versions for the most common standard.
Download Datasheet

In the machine tools market the OCT (One Cable Technology) so-lutions are becoming increasingly common. The single-cable solu-tion ensures that instead of the traditional servo cable for power supply and sensor cable for the position information, the transmission and signal are integrated into one single cable. The precondition for the use of a single-cable solution between the servomotor and the controller is the use of a hardware-based encod-er designed for this purpose. Since the encoder is perma-nently connected to the servomotor, the system shall be made available to the final customer by the manufactur-er of the servo motor. MotionCables began the develop-ment of her OCT solutions with SICK®, creating a cable for their HIPERFACE® DSL system that has been ap-proved and qualified by SICK®: now MotionCables is therefore a SICK® certified manufacturer for this cable. Strengthened by this experience MotionCables has de-veloped a version for the HMC 6® Full Digital system of Heidenhain® based on the EnDat 2.2 protocol as well as the analogus fro B&R®. Both cables have been tested in our laboratories and in their versions (fixed installation, mobile, high performance) have operated up to ten mil-lion cycles. With regard to the HIPERFACE® DSL cable MotionCables has recently developed a new version with dual Shield, even more powerful for data transmission quality and with an higher rate in noise reduction up to 4,5 kV @ 10 MHz.
Download Datasheet

DRIVEConn® MT Feedback Cables has been studied to sup-port the complete supply of any drive in an operative fac-tory. All the necessary data - software and programmation, axis positioning, diver’s actuation and control - are provid-ed through a connection cable that has been developed with this in mind. In complete accordance to UL, CSA and DESINA standard and standardisation, MOTIONCABLES provide feedback cables solutions for the most relevant systems.
Download Datasheet

DRIVEConn® MT BUS is a family of products that includes all cables designed to be used in the most common com-munication systems including sensors and actuators, and / or between automatic control systems (PLC)commonly defined Fieldbus.Manufacturers have thus constituted as-sociations that use their “fieldbus”to which the system must conform to communicate properly. The mostcom-mon fieldbus systems proposed by MotionCables are: PRO-FIBUS™,PROFINET™, INDUSTRIAL ETHERNET, ETHER CAT, CAN Open™, DeviceNet™,USB™.
Download Datasheet

From her wealth of experience and her knowledge of raw mate-rials, MotionCables continues to develop types of products ded-icated to specific applications. This is how the cables with very low impedance, studied in their structure so as to effectively disperse electromagnetic interfer-ence have born. Cables for heavy mobile applications for use on cable reels, vertical spreader systems with high-speed, festoons, systems with gravity-fed solution. Cables for extreme torsional applications (± 360 °) to be used in robot arms of electric spin-dles or similar applications. The "Heavy" cables of the family, which can be used in particularly demanding areas such as con-struction sites, placement, camping or anywhere where a cold and crush-resistant cable is necessary. Our research proceeds, so be sure that new families will join this section soon.
Download Datasheet